This is the kit to build our very best complete fine plastic unit without any wood. Makes extensive use of flange bearings for minimal friction and features full funtionality in an awesome laser cut/engraved front and back in your choice of materials.
Below is a list of the over 300 components included in the kit:
Needed | Item | Tray | Shipped |
83 | FullMonty 3D Printed Items | 3&6 | 83 |
11 | Back 3D Printed Needles | 3 | 11 |
7 | Front Laser Cut Needles | 3 | 7 |
34 | Common Laser Cut Gears | 5&6 | 34 |
28 | FullMonty Laser Cut Gears | 4 | 28 |
5 | Laser Cut Panels & Skin | 2 | 5 |
34 | Brass Axles, Rods and Dowels | 3 | 34 |
40 | MF52ZZ Flange Bearings 2x5x2.3mm | 3 | 40 |
2 | F683ZZ Flange Bearings 3x7x3mm | 3 | 2 |
0 | #2 x 1/4 Screws | 3 | 0 |
50 | #2 x 3/8 Screws – Standoffs | 3 | 50 |
7 | #2 x ½ Screws – Beauty Plates | 3 | 7 |
12 | M3.5x7mm (#6-40) Set Screws + 1/16” Allen Key | 3 | 12 |
2 | Cotton Gloves | 1 | 2 |
1 | Super Glue Tube | 3 | 1 |
1 | Keychain | 1 | 1 |
1 | Flash Drive/BOM | 3 | 1 |
318 |
|
|
|
4 | FullMonty Sides (If ordered) | 6 | 4 |
16 | Screws #0 x 1/2 (for Sides) | 3 | 18 |
4 | Felt Pads (for Sides) | 3 | 4 |
342 |
|
|
|
